Pinhole Blender

Instructions for the Pinhole Blender Anamorphic
4x5 film must be loaded in total darkness
	To load the film, first have the camera open in front of you with the front pinhole facing towards you.
	Hold the film horizontally and fold the film into a C shape with the emulsion facing inwards. Insert into the camera with the open end of the C facing the front pinhole.
	Attach the top and make sure all pinhole are covered with the magnetic shutters or light tight black tape.
	Use the center pinhole for traditional convex curved pinhole images. The center pinhole has a focal length of 60mm and is 0.3mm in diameter creating an f 200 aperture. The end pinholes create the anamorphic effect and have a focal length of 30mm with pinholes 0.15mm in diameter also creating an f 200 aperture. Use all three pinhole at your own risk. Who knows what will happen.
If you have any further questions, problems, or simply need assistance choosing subjects to photograph, you may contact Pinhole Blender by e-mail: info@pinholeblender.com